Multimetre ve Dijital Pens Apmermetre 50AC Voltaj Kontrol Kalemi

TPI AC Volt Testers. Determine the presence or absence of AC voltage without disconnecting the system in question. 


 No switch required, always 'on' ready for use
 
 Uses 2 AAA batteries (included)
 
 UL listed 
 
 Lifetime warranty 
 
 Model 40 (low voltage): Red glow indicates presence of 24-90 V 
 
 Model 45: Red glow (visual alarm) indicates presence of 50-1,000 V
 
 Model 50: Audible buzzer and visual alarm, red glow indicates presence of 50-1,000 V   
 
  • Data Sheet
  • Kullanım Kılavuzu
  • Özellikler
  • Uygulamalar
  • Videolar
 
TPI Models 40/ 45/ 50 AC Volt Testers

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

The TPI 45 is essential to anyone determining the presence or absence of electrical voltage between 50-1,000 AC. The TPI 45 allows the user to detect a defective ground before an individual is exposed to injury. Simply touch the plastic tip to a connection point or move it along a wire. If AC voltage is present, the tip will glow red. Defective grounds can cause either voltage or an electrical field to be present on a metal casing. Both of these conditions can be detected by using the TPI 45.

The TPI 40 is essential to anyone determining the presence or absence of electrical voltage between 24-90 VAC. Use the TPI 40 for checking lawn irrigation equipment, thermostat controls, vending machine changers, and other low voltage equipment.
 

 

 
Operating Instructions

Defective Grounds: Electrical equipment that has a metal enclosure and is improperly grounded or has a defective ground will always result is the Sensors tip emitting a steady red glow. I f there is enough electrical field present on the metal enclosure, the result will be a steady red glow and an audible tone.

Benefits of the TPI AC Volt Check 50:

Always Read For Use
No Switch required. Competing products require an ON/OFF switch. Switches must be turned on and can malfunction over time.

Sound & Visual Alert
Sound and bright red glow indicates the voltage. With the AC Safety Volt Check 50, the audio alert does not go off from contact with static electricity, it only reacts to AC voltage. Our AC Sensor is able to tell difference between static charge and AC current. Competitors' audio alerts constantly go off when the tool comes in contact with static electricity. 

Operating Instructions
The "TPI AC Safety Volt Check 50" is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches and any other voltage carrying electrical systems. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, the AC Safety Volt Check 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC Sensor to be used as a troubleshooting instrument. Always hold unit by its body (2). Keep fingers away from the tip (3). 

 

 
 Models 40/ 45/ 50 Specifications
 40 Non-Contact Voltage: 24-90 VAC
 45 / 50 Non-Contact Voltage: 50-1,000 VAC

 Power Supply: 2 AAA Batteries 

 
 
Models 40/ 45/ 50 Applications

45 / 50: Check for presence or absence of AC voltage in: wires, wall receptacles, fuses, junction boxes, switches, defective grounds, and any other voltage carrying electrical circuits.


40: Check lawn irrigation equipment, thermostat controls, vending machine changers and other low voltage equipment. 

 
 
 

TPİ TÜRKİYE 

Bağlarbaşı Mah. Ömür Sk.No:26/2 Yaşar Dursun Plaza Maltepe / İSTANBUL / TÜRKİYE 

 İletişim :(0216) 383 00 99 | | Email : info@tpiturkiye.com