Multimetre ve Dijital Pens Apmermetre EZ100 Tek düğmeli multimetre
EZ 100 Tek tuşlu moltimetre

AC/DC ve OHMS arasında otomatik seçim

Tek butonlu kullanım - Sadeve ON/OFF Butonlu

AC/DC ve OHMS ile voltaj ölçümü ve sigorta kontrolü yapın

Ayar değiştirmeye gerek YOK!!!

0-600 Volt AC&DC ölçümü

40 Meg OHMS ölçümü

  • Data Sheet
  • Kullanım Kılavuzu
  • Özellikler
  • Uygulamalar
  • Videolar

No More Guessing, EZ One Button Operation.

The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically.

Features of the Model 100:
• EZ to use one button operation
• Automatically Measures DC Volts, AC Volts and Ohms (Resistance)
• Large 4,000 Count Display
• 0 to 600 Volts AC and DC
• 10M Ohm impedance
• Auto Power Off After 10 Minutes
• Includes Test Lead Set, Batteries and Protective Rubber Boot
• 3 Year Limited Warranty


Make sure that the ground and positive leads are plugged into the proper receptacle for corresponding function positions. Do not attempt to make a voltage measurement of more than 500V or of a voltage that is unknown.

The 100 comes complete with the following accessories:
• 100 Instrument
• Rubber Boot
• Test Lead Set
• 1.5V Battery
• Instruction Manual



 Model 100 Specifications

 DC Volts Maximum Input: 600V (Minimum Input = 1.5V)
 Maximum Resolution: 0.001V
 Accuracy: +/-0.5%
 AC Volts Maximum Input: 600V (Minimum Input = 1.7V)
 Maximum Resolution: 0.1V
 Accuracy: +/-0.8%
 DC Amps N/A
 AC Amps N/A
 Resistance (Ohms) Maximum Input: 40MΩ
 Maximum Resolution: 0.1Ω
 Accuracy: +/-0.8%
 Frequency N/A
 Capacitance N/A
 Inductance N/A
 (K-Type Thermocouple)
 Continuity Audible at less than 100Ω
 Diode N/A
 Duty Cycle N/A
 True RMS Responding No
 Conductance No
 Pulse Width No
 Data Hold No
 Min/Max Record No
 Time Stamp Logging No
 Relative Mode No
 Compare Mode No
 RS-232 Output No
 Process Loop Output No
 Sleep Mode / Auto Off No
 Protective Boot Yes (standard)
 Display Type 4000 count LCD
 Range Selection Auto including function selection
 Operating Temperature 32°F to 104°F (0°C to 40°C)
 Storage Temperature 14°F to 122°F (-10°C to 50°C)
 Humidity 80% non-condensing
 Size 6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot
 Weight 12oz (340g) with boot
 Battery Type 1.5V “AA” Alkaline (2)
 Battery Life 500hrs Typical
 OverInput Category CAT III 600V
 Agency Approval IEC 61010-1
 Warranty 3 Years

 • Measure line and control circuit voltages
• Measure resistance of motor windings, transformers, and solenoids
• Make general AC and DC voltage and resistance measurements
• Measure the resistance of elements and electric heater cores
• Test continuity of wiring
• Verify voltage at breakers and outlets
• Use as a back-up meter in your tool box




Bağlarbaşı Mah. Ömür Sk.No:26/2 Yaşar Dursun Plaza Maltepe / İSTANBUL / TÜRKİYE 

 İletişim :(0216) 383 00 99 | | Email :